[MemoryTest 0]

Хочу поднять вин це на данном MCU, пока что поднят е-бут который может принимать образ по сети и передавать ему управление., Нужно добить OAL и дрова для переферии. Кто заинтерисован join! Просто у самого времени много нет. :( но готов чем могу помогать.

p.s. WIN_CE5.0 ;

p.p.s Board = 16mbx16 flash-NAND + 16mbx16sdram + 10/100ethernet + 4serial

з.ы. Выглядит примерно так.

 

 

 

Starting auto-download ...

InitEthDevice

INFO: AT91MAC_Init

INFO: AT91MAC_Init

mac=6

mac=605

mac=4

mac=403

mac=2

mac=201

 

AT91F_EmacEntry(void)

our MAC = 214365

our IP = 192.168.0.72

AT91F_EMACInit

AT91F_EMAC_CfgPMC();

AT91F_EMAC_CfgPIO();

AT91F_MDIO_StartupPhy(pEmac);

done

_OEMPlatformInit....

System ready!

Preparing for download...

 

PreDownload(void)

INFO: *** Device Name 'RAT1286' ***

INFO: Using static IP address 121807.

INFO: Using subnet mask 2525250.

mac[0] = 201

mac[1] = 403

mac[2] = 605

+EbootSendBootmeAndWaitForTftp

Sent BOOTME to 255.255.255.255

Locked Down Link 1

Src IP 192.168.0.72 Port 0400 Dest IP 192.168.0.55 Port 07CC

EthDown::TFTPD_OPEN::boot.bin

-EbootSendBootmeAndWaitForTftp

rom_offset=0x0.

ROMHDR at Address 80100044h

Got EDBG_CMD_JUMPIMG

Got EDBG_CMD_CONFIG, flags:0x00000000

INFO: OEMLaunch: Jumping to Physical Address 0x201062D8h (Virtual Address 0x801062D8h)...

 

 

INFO: OEMLaunch: Jumping to Physical Address dwImageStart 0x80100000h (Virtual Address dwLaunchAddr 0x801062D8h)...

 

 

Xaa!

Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00

ProcessorType=0920 Revision=0

sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 801062a8

DCache: 8 sets, 64 ways, 32 line size, 16384 size

ICache: 8 sets, 64 ways, 32 line size, 16384 size

Sp=ffffc7cc

OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45

RaiseException: Thread=805dc9f8 Proc=8034c020 'NK.EXE'

AKY=00000001 PC=8013e3c8(NK.EXE+0x0003e3c8) RA=801067c0(NK.EXE+0x000067c0) BVA=00000001 FSR=00000001

RaiseException: Thread=805dc9f8 Proc=8034c020 'NK.EXE'

AKY=00000001 PC=8013e3c8(NK.EXE+0x0003e3c8) RA=801067c0(NK.EXE+0x000067c0) BVA=00000001 FSR=00000001

OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35

OEMIoControl: Unsupported Code 0x10100cc - device 0x0101 func 51

OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52

OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62

RaiseException: Thread=805d1844 Proc=8034c110 'filesys.exe'

AKY=00000003 PC=8013e3c8(NK.EXE+0x0003e3c8) RA=801067c0(NK.EXE+0x000067c0) BVA=00000001 FSR=00000001

RaiseException: Thread=805d1844 Proc=8034c110 'filesys.exe'

AKY=00000003 PC=8013e3c8(NK.EXE+0x0003e3c8) RA=801067c0(NK.EXE+0x000067c0) BVA=00000001 FSR=00000001

RaiseException: Thread=805d1844 Proc=8034c110 'filesys.exe'

AKY=00000003 PC=8013e3c8(NK.EXE+0x0003e3c8) RA=801067c0(NK.EXE+0x000067c0) BVA=00000001 FSR=00000001

Exception 'RaiseException' Thread=805d1844 AKY=00000003 PC=ffffcbc0 BVA=00000001[/size]