[kot-begemot72 0]

Yokogawa VC3300 wireless communication tester

опции: /G GSM /HD1 WDCMA/HSDPA /C1 GPIB

 

ЦЕНА 45 000 руб.

 

г.Екатеринбург

тел.8-912-26-32-327

[email protected]

Возможна отправка по РФ

 

 

WCDMA (UMTS) part GSM part

General specifications General specifications

Item Specifications Item Specifications

Band UARFCN Band ARFCN

1 9612 to 9888 0 to 124

9262 to 9538 Frequency GSM900/DCS1800

2 955 to 1023

12 to 287 512 to 885

3 8562 to 8913 (BCCH/TCH) 128 to 251

Frequency 8562 to 8763 GSM850/PCS1900

4 512 to 810

(Reception) 1162 to 1362

4123 to 4233

Downlink transmission section

782 to 787

5

807 to 812 Item Specifications

837, 862 Frequency offset -75 to +75kHz (resolution 1kHz) (TXRXmode only)

4162 to 4188 -120.0 to -10.0 dBm (resolution 0.1dBm)

6 Transmission power

812, 837 Accuracy: ±1.0dB (>-110.0 dBm)

Downlink transmission section Uplink reception section

Item Specifications Item Specifications

-120.0 to -10.0 dBm (resolution 0.1dBm) Maximum input level +35dBm (CW), +40dBm (GSM single burst)

Transmission power Reception power

Accuracy: ±1.0dB (>-110.0 dBm) Minimum sensitivity -40 dBm

Modulation accuracy 4% or less (when trasmitting DPCH 1ch) Measurement range -40 dBm to +35 dBm

Power measurement

Accuracy ±1.0 dB

Uplink reception section mPheaasseu reermroernt RMeesaisduurael merernotr range pAepapkro 0x..5 1 t.o4 4d5e.g0 (drmegs, vrmalus e0).5 to 20.0 deg

Item Specifications Frequency error Measurement range 0 to ±10 kHz

Maximum input level +35dBm

Reception power measurement Residual error ±0.01 ppm

Minimum sensitivity -70 dBm

Measurement range -70 dBm to +35 dBm

Power measurement

Accuracy ±1.0 dB Measurement function

EVM Residual EVM 3% rms Typical (input level >-30 dBm) Item

Frequency error Measurement range 0 to ±10 kHz Location update

measurement Residual error ±0.01 ppm Call setup/release

Emergency call

Signaling function

Measurement function Frequency handover

System handover

Item Dialing number display

Registration Speech function PN signal transmission and voice loop back

Call setup/release Transmission power

Test loop (RMC 12.2k) Frequency error

Signaling function Emergency call Phase error (rms and peak)

Frequency handover Burst timing

System handover Spectrum (modulation) Offset 100,200,250,400 to 1800 (step 200) kHz

Dialing number display Radio characteristics Spectrum (switching) Offset 400, 600, 1200 to 1800 kHz

measurement

Speech function PN signal transmission and voice loop back RX quality (UE report)

Transmission power RX level (UE report)

Frequency error FER (loopback)

Modulation accuracy BER (loopback)

Open loop power control Actual MS power level

Inner loop power control 1 dB step and 2 dB step

Radio characteristics

measurement Transmission OFF power Model Suffix code Description

ON/OFF time mask

Occupied bandwidth 733020 VC3300 Main frame

Spectrum emission mask Power cable -D UL and CSA

Adjacent channel leakage power ratio ±5 MHz and 10 MHz -F VDE

Bit error rate -Q BS

-R AS

Base unit general specifications Options -H /G*1 GGBSM test software pre-install

Item Specitications /E*1*2 GSM/GPRS/EDGE test software pre-install

Input/output impedance 50Ω(Typical) /W*1 WCDMA test software pre-install

RF input/output Maximum input power 4W /C1*2 GPIB Interface

connector type N

Input frequency 10 MHz ±3ppm Model Description

External reference

Input impedance 5 kΩ(Typical)

frequency(REF IN)

Connector type BNC

Display 8.4 inch color TFT LCD

Interface 100BASE-TX, RS232, GPIB(option)*

External dimensions 426(W) x 177(H) x 300(D) [mm]

Weight Approx. 10kg

Supply voltage 100 to 120 VAC/200 to 240 VAC

Power supply frequency 50/60Hz

Maximum power 250 VA or less

[kot-begemot72 0]

UP

[Oliver MacDonald 0]

Hello,

I am looking to get a copy of the user manual cd for the yokogawa vc3000.  Are you able to provide and how much would it cost.

Thank you.