Realking 0 20 октября, 2004 Опубликовано 20 октября, 2004 · Жалоба объясните как соблюсти требование к 4 клокам PCI для PC104+ 2.5 дюйма если на плате стоит Mux/Demux Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
Elresearch 1 21 января, 2005 Опубликовано 21 января, 2005 · Жалоба В спецификации же всё написано: 1) "The multiplexer chips are Dual 4:1 Mux/Demux chips. They provide a 5W switch that connects the input and output together. These switches provide a bi-directional path with no signal propagation delay other than the RC delay of the on resistance of the switch and the load capacitance. This is typically 250ps at 50pF load." 2) "The clocks are tuned on the Host Board such that the length of CLK3 trace is »0.662" less than CLK2, CLK2 trace is »0.662" less than CLK1, and CLK1 trace is »0.662" less than CLK0. Therefore, the first module on the stack must select CLK0 (the longest trace), the second CLK1, etc. This provides almost no clock skew between modules. Trace length limits are as indicated in the PCI Local Bus Specification Revision 2.2." Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться