Да, по второму вопросу протупил, виноват, исправлюсь. Хотя..., а если это библиотека, я не знаю имён модулей, но хочу разместить её в определённом фрагменте памяти?
А вот по первому
/* Linker script to configure memory regions.
* Need modifying for a specific board.
* FLASH.ORIGIN: starting address of flash
* FLASH.LENGTH: length of flash
* RAM.ORIGIN: starting address of RAM bank 0
* RAM.LENGTH: length of RAM bank 0
*/
MEMORY
{
FLASH1 (rx) : ORIGIN = 0x0, LENGTH = 0x1000
FLASH2 ® : ORIGIN = 0x1000, LENGTH = 0x1000
FLASH3 (rx) : ORIGIN = 0x2000, LENGTH = 0x80000 - 0x2000
RAM (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 8K */
RAM2 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 8K */
}
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __copy_table_start__
* __copy_table_end__
* __zero_table_start__
* __zero_table_end__
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __end__
* end
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
*/
ENTRY(Reset_Handler)
SECTIONS
{
.text0 0x0:
{
KEEP(*(.isr_vector))
KEEP(*(.Reset_Handler_s))
KEEP(*(.init))
KEEP(*(.fini))
} > FLASH1
.dfdata 0x1000:
{
/*. = 0x1000;*/
*(.ARM.__AT_0x00001000)
} > FLASH2
.text 0x2000 :
{
/*. = 0x2000;*/
*(.text*)
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
} > FLASH3
__exab_start = .;
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH3
__exab_end = .;
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH3
__exidx_end = .;
/* To copy multiple ROM to RAM sections,
* uncomment .copy.table section and,
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
/*
.copy.table :
{
. = ALIGN(4);
__copy_table_start__ = .;
LONG (__etext)
LONG (__data_start__)
LONG (__data_end__ - __data_start__)
LONG (__etext2)
LONG (__data2_start__)
LONG (__data2_end__ - __data2_start__)
__copy_table_end__ = .;
} > FLASH3
*/
/* To clear multiple BSS sections,
* uncomment .zero.table section and,
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
/*
.zero.table :
{
. = ALIGN(4);
__zero_table_start__ = .;
LONG (__bss_start__)
LONG (__bss_end__ - __bss_start__)
LONG (__bss2_start__)
LONG (__bss2_end__ - __bss2_start__)
__zero_table_end__ = .;
} > FLASH3
*/
__etext = .;
.data : AT (__etext)
{
__data_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM
.bss_RAM2 : ALIGN(4)
{
PROVIDE(__start_bss_RAM2 = .) ;
*(LWIP_ram_heap*)
*(.bss.$RamAHB32*)
. = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */
PROVIDE(__end_bss_RAM2 = .) ;
} > RAM2
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.heap (COPY):
{
__end__ = .;
PROVIDE(end = .);
*(.heap*)
__HeapLimit = .;
} > RAM2
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > RAM2
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
/*ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")*/
}
Вот так мне нужно, но не работает
А вот так работает
/* Linker script to configure memory regions.
* Need modifying for a specific board.
* FLASH.ORIGIN: starting address of flash
* FLASH.LENGTH: length of flash
* RAM.ORIGIN: starting address of RAM bank 0
* RAM.LENGTH: length of RAM bank 0
*/
MEMORY
{
FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 128K */
RAM (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 8K */
RAM2 (rwx) : ORIGIN = 0x200c7000, LENGTH = 0x8000 /* 8K */
}
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __copy_table_start__
* __copy_table_end__
* __zero_table_start__
* __zero_table_end__
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __end__
* end
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
*/
ENTRY(Reset_Handler)
SECTIONS
{
.text :
{
KEEP(*(.isr_vector))
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
/* To copy multiple ROM to RAM sections,
* uncomment .copy.table section and,
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
.copy.table :
{
. = ALIGN(4);
__copy_table_start__ = .;
LONG (__etext)
LONG (__data_start__)
LONG (__data_end__ - __data_start__)
LONG (__etext2)
LONG (__data2_start__)
LONG (__data2_end__ - __data2_start__)
__copy_table_end__ = .;
} > FLASH
/* To clear multiple BSS sections,
* uncomment .zero.table section and,
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
.zero.table :
{
. = ALIGN(4);
__zero_table_start__ = .;
LONG (__bss_start__)
LONG (__bss_end__ - __bss_start__)
LONG (__bss2_start__)
LONG (__bss2_end__ - __bss2_start__)
__zero_table_end__ = .;
} > FLASH
__etext = .;
.data : AT (__etext)
{
__data_start__ = .;
*(LWIP_ram_heap)
__data_end__ = .;
} > RAM
__etext2 = __etext + SIZEOF(.data);
.data2 : AT (__etext2)
{
__data2_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data2_end__ = .;
} > RAM2
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.bss2 :
{
. = ALIGN(4);
__bss2_start__ = .;
*(COMMON)
. = ALIGN(4);
__bss2_end__ = .;
} > RAM2
.heap (COPY):
{
__end__ = .;
PROVIDE(end = .);
*(.heap*)
__HeapLimit = .;
} > RAM2
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > RAM2
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
}
