Перейти к содержанию
    

Function managed variants

Есть DxD для PADS 9.4.1.

В хелпе от PADS написано, что можно работать с сабжем. Но окошко не открыть, ибо пункта такого нет в меню. Пункт появляется, если создать проект для EE (конфигуратор трогать не обязательно).

 

Что все это значит? FMV таки есть, или его таки нет?

Поделиться сообщением


Ссылка на сообщение
Поделиться на другие сайты

Есть DxD для PADS 9.4.1.

В хелпе от PADS написано, что можно работать с сабжем. Но окошко не открыть, ибо пункта такого нет в меню. Пункт появляется, если создать проект для EE (конфигуратор трогать не обязательно).

 

Что все это значит? FMV таки есть, или его таки нет?

 

Вообще-то если сравнить два описания eevm_user.pdf:

Definitions

When using Variant Manager, it will be helpful to understand the following terms:

Physical Variant - an alternate assembly of a design that makes use of different part or

packaging options such that the optimal configuration (in terms of functionality, cost,

performance, or some other criterium) can be determined. A physical variant references

a physical component and operates at the package level, where packages are directly

assigned, removed or replaced. Typically, variant solutions operate in the physical

variant mode. Physical variants can be defined in both the schematic or layout

environments.

Function Managed Variant (FMV) - an alternate assembly of a design as defined

through functions. Function managed variants operate on packaged or unpackaged parts

at a functional level. Instead of manipulating individual packages, the parts in a

schematic are associated with a function name which then can be used to define the

variations of the design. FMVs can only be defined in the schematic environment.

Function - a collection of component circuitry that defines an electrical function.

Concurrency - It is possible for several users to create variant data for a single design

concurrently. That is, one user may create variant data in the design capture phase

(DxDesigner), while another user simultaneously creates variant data for the same

design in the layout phase (Expedition PCB).

 

Definitions

When using Variant Manager, it will be helpful to understand the following terms:

Physical Variant - an alternate assembly of a design that makes use of different part or

packaging options such that the optimal configuration (in terms of functionality, cost,

performance, or some other criterium) can be determined. A physical variant references

a physical component and operates at the package level, where packages are directly

assigned, removed or replaced. Typically, variant solutions operate in the physical

variant mode. Physical variants can be defined in both the schematic or layout

environments.

Function - a collection of component circuitry that defines an electrical function.

Concurrency - It is possible for several users to create variant data for a single design

concurrently. That is, one user may create variant data in the design capture phase

(DxDesigner), while another user simultaneously creates variant data for the same

design in the layout phase (PADS).

 

то сразу видно отсутствие Function Managed Variant (FMV) для PADS.

Поделиться сообщением


Ссылка на сообщение
Поделиться на другие сайты

Хм, зачем чего-то сравнивать, когда тупое открытие хелпа говорит, что это, якобы, есть?

Вот три скриншота после нажатия кнопки F1. Кагбэ любой нормальный человек рассчитывает, что в последнем написана правда, верно?

post-15887-1379069222_thumb.jpg

post-15887-1379069271_thumb.jpg

post-15887-1379069302_thumb.jpg

Поделиться сообщением


Ссылка на сообщение
Поделиться на другие сайты

Речь про 9.4.

Поставим вопрос по-другому.

Вот у меня нету EE, а есть только PADS 9.4. Скриншоты я привел. Как мне понять, глядя на них, почему у меня не запускается FMV?

Поделиться сообщением


Ссылка на сообщение
Поделиться на другие сайты

Речь про 9.4.

Поставим вопрос по-другому.

Вот у меня нету EE, а есть только PADS 9.4. Скриншоты я привел. Как мне понять, глядя на них, почему у меня не запускается FMV?

 

Я Вам привел скрин из PADS 9.5, там нет FMV, скорее всего просто забыли убрать из документации менеджера вариантов PADS 9.4, то что ему не соответствует.

Поделиться сообщением


Ссылка на сообщение
Поделиться на другие сайты

Присоединяйтесь к обсуждению

Вы можете написать сейчас и зарегистрироваться позже. Если у вас есть аккаунт, авторизуйтесь, чтобы опубликовать от имени своего аккаунта.

Гость
Ответить в этой теме...

×   Вставлено с форматированием.   Вставить как обычный текст

  Разрешено использовать не более 75 эмодзи.

×   Ваша ссылка была автоматически встроена.   Отображать как обычную ссылку

×   Ваш предыдущий контент был восстановлен.   Очистить редактор

×   Вы не можете вставлять изображения напрямую. Загружайте или вставляйте изображения по ссылке.

×
×
  • Создать...