mobidev

Ребята наверно ещё выбирают конкретное направление, доменное имя зарегистрировано 01 марта 2015 года.

Установочный DMG для OS X сборки BZR4338 GOST от 2015-05-23 (MD5 = 650a88396debf79f07cba6bb15cdb8be).

Установочный DMG для OS X сборки BZR5678 от 2015-05-22 (MD5 = 9e6eb8f5fb38825181dd27f2a1ba6c89).

Но там не ГОСТсборки ;( http://www2.futureware.at/~nickoe/ ГОСТовские в соответствующей ветке на этом форуме.

Сегодня стал доступен для загрузки и последующей установки CircuitMaker бета-версии http://www.circuitmaker.com/#download

Python script to generate footprints from openscad https://forum.kicad.info/t/python-script-to...om-openscad/869

Sensor de temperatura MCP9700 https://github.com/nimbleprototypes/np_sen001 Adaptador SOIC a DIP 8 pines https://github.com/nimbleprototypes/np_bob001

а Вы на каком дистрибутиве сидите? P.S. просто на Fedora 21 тоже при просмотре инфо о версии kicad пишет BZR unknown

К сожалению нарисовано не в KiCad, хотя народ в комментариях по лику интересовался "почему же нарисовано не в KiCad", но всё же добавлю: Новая SBC от OLIMEX Ltd A33-OLinuXino Open Source Hardware Linux SBC with Quad Core Cortex-A7 ARM processor running at 1.5Ghz https://olimex.wordpress.com/2015/05/18/11905/ P.S. https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/A33

Было бы очень полезно, если бы разработчики KiCad кроме возможности вставки картинок интегрировали вставку тех же таблиц формата openoffice/libreoffice или в крайнем случае какого-то внутреннего формата.

Скорее всего сплошную линию не сделали, чтоб не перепутать с проводником или шиной, как вариант вставить картинку с таблицей, пример можно увидеть в проекте: https://github.com/vedderb/bldc-hardware по иерархическим подсхемам.

Немного оффтопика... Майская новость о начале продаж юрлицам ПК на отечественном процессоре Эльбрус-4С (Компьютеры на базе процессоров Эльбрус-4С стали доступны для покупки юридическими лицами) порадовала, кроме цены новость выглядит достойно. Хотелось бы конечно, чтобы и видеокарта в нём была своя, за основу можно было бы взять OpenGraphics Project и OpenShader (Open architecture GPU simulator and implementation), хотя наверно это уже несколко устраревшии технологии, но надо же с чего-то начинать. P.S. надо поспешать, а то Мексика обгонит ещё ;) Мексика и Россия: схожие проблемы в обучении разработке электроники

Установочный DMG для OS X сборки BZR4337 GOST от 2015-05-16 (MD5 = 22e482f2293acf44e46abb0b9a4e133f).

scale-interface/ A simple USART / Bluetooth interface for a kitchen scale hw Add schematics and PCB layout 10 months ago sw Align comments properly 10 months ago LICENSE Initial commit 10 months ago README.md Update README.md 10 months ago http://adam-dej.github.io/2014/07/08/scale-interface.html

Установочный DMG для OS X сборки BZR5653 от 2015-05-13 (MD5 = c93d208c8215710cbcb1a182970bdfa1).

HDMI2USB - A HDMI/DVI Capturing Solution HDMI2USB is a device to capture HDMI and DVI (and Displayport with cheap active adapters) and send it on USB port as UVC video. The device attaches computer as a standard webcam so there is no need of installing additional drivers. More information about the device can be found in the wiki @ https://github.com/timvideos/HDMI2USB/wiki. Firmware This repository contains the source code for the various firmware in the HDMI2USB. More information on the firmware required by the HDMI2USB can be found on the Firmware in the wiki Prebuilt firmware suitable for loading on devices can be found in the HDMI2USB-firmware-prebuilt repository A Developer's Guide to the functionality, design and source code can be found at: Google Docs Hardware Serial expansion board and adapters for HDMI2USB git clone https://github.com/timvideos/HDMI2USB-vmodserial.git VGA capture expansion board for HDMI2USB (or Digilent Atlys prototype board). git clone https://github.com/timvideos/HDMI2USB-vmodvga.git

amstan/tr2 DeltaBot software Overview The goal of this project is to develop a hardware and accompanying software platform for controlling robots from a high level programming language such as Python. Hardware The hardware will consist of a multi-axis motor control board, industrial strength GPIO for controlling alarms, incandescent lamps, driving fans and more. Software The software will provide an abstract interface to the hardware platform. The first robot that will be tailored to this project will be a 3-axis Delta Robot. Project Structure Here is the folder structure for the project: blender/ 3D models of target robots board/ The first hardware platform for this project board/bomParser/ Some pretty untested code to do mass changes in schematics/BOMs datasheets/ Component datasheets doc/ Notes, logo firmware/ Bare metal bring up of STM32F4 and code for the robot controller pictures/ Various pictures of the project python/ The python software interfaces ui/ A user interface to all of this

Установочный DMG-образ сборки BZR5650 от 2015-05-11 (MD5 = 5a9c8e5c55ba8027039b74e60645b9d7).

Установочный DMG для OS X сборки BZR4335 GOST от 2015-05-09 (MD5 = 2e25a132c642574b6331dc450a429f43).

emusan/FPGA_HDMI-pcb PCB layout for my cheap FPGA HDMI experimenting board FPGA HDMI Experimenting Board PCB Layout Files Note that this project is still in progress. Most of the work on the schematic is finished, with the pcb layout being the priority right now. This board is designed to be relatively cheap (compared to other FPGA options with HDMI), and be fairly small at 2x2in. To meet these requirements some corners were cut (like ESD protection on the HDMI), though it still should function well. This is not intended to be a consumer device, but rather a development and experimenting platform for those interested in playing around with HDMI.

Ещё один проект связанный с Arduino https://code.google.com/p/kicaduino/ There are too few, readily available and open projects in KiCAD format. I'm working to change that -- by taking some I like and re-creating them in KiCAD. Why? Well, because it seemed a good idea and I seem to have the time. I'm starting with the good old Arduino UNO Rev.3, reference design. Obviously, my KiCAD version will not be an exact copy. In fact, I'll probably change the USB connector to USB-B-mini SMD. But otherwise, the circuitry will be the same, down to the socketed, DIP 'mega328. Maybe I'll do other versions later. Arduino is a trademark of the owners of www.arduino.cc (they don't seem to have a name, other than Arduino -- even on their trademark information page). These KiCAD re-creations are created by (an) separate individual(s) who are in no way related to the Arduino trademark owners or indeed (probably) even known to them. Please see www.arduino.cc for all official Arduino information. Before the grand idea of re-creating multiple projects in KiCAD format came about, I had already completed a prototype KiCAD version of the Freaklabs Freakduino, with 2.4GHz radio on board. The learning I accomplished and the fun I had with that exercise, is more or less what led to this one.

Если не сложно, можете выложить свежую сборку, а то народ интересуется в топике ГОСТ-сборки: тестовые и стабильные

Ещё один проект использующий CAN интерфейс CAN repository containing my CAN project, kicad files, firmware, datasheets, references, etc. Git repo for obd2-CAN board. obd2/ directory contains the KiCAD files lpcxpresso/ directory contains the files required to build firmware with lpcxpresso obd2_lpc1343/ is legacy directory when the 1343 was explored. reference/ contains CAN and obd2 and other reference material used in design video/ videos taken of design/build/test datasheets/ any datasheets of parts used or explored

Установочный DMG-образ сборки BZR5647 от 2015-05-08 (MD5 = 33dbaecf4115bc1fbc20f5f045c7d910).

Reverse-engineering the first Bulgarian personal computer IMKO-1 - The first Bulgarian personal computer Reverse engineering, KiCAD schematic and PCB layout by Dimitar Kovachev and Konstantin Kolev Testing utilities and emulators for IMKO-1 IMKO-1 - The first Bulgarian personal computer. Testing utilities and emulators. KiCAD schematic, PCB layout and Arduino code by Dimitar Kovachev P.S. Released under the Creative Commons Attribution Share-Alike 3.0 license http://creativecommons.org/licenses/by-sa/3.0/