-------------------------------------------------------------------- | HyperLynx Batch Mode Report, Version 8.0 | | | | Note: Search on '** Warning **' and '** Warning(Severe) **' | | to find signal-integrity and EMC problems. | | | | Note: The signal-integrity information below is a summary of | | the results from the corner cases selected for this batch | | run (Fast-Strong, Typical, and Slow-Weak). | | | | Note: Signal-integrity simulation tests for SI compliance | | against user-set limits, and includes effects of | | transmission-line discontinuities, IC loading, etc. | | SI violation flags include: | | D = Delay error | | -> min delay to pin < net's min delay threshold OR | | -> max delay to pin > net's max delay threshold | | T = Threshold error | | -> during transition, the pin's signal level did | | not reach the switching threshold | | R = Rail-overshoot error | | -> pin's signal level exceeded the power-supply rail | | by more than the net's overshoot threshold | | O = Signal-integrity-overshoot error | | -> pin's signal level exceeded the steady-state | | level by more than the net's overshoot threshold | | M = Multi-threshold-crossing error | | -> pin's signal level crossed the threshold more | | than once during transition | | N = Non-monotonic error | | -> pin's signal level changed direction while within | | the transition region between Vil and Vih | | X = Crosstalk error | | -> crosstalk from neighbor nets exceeded the | | threshold value for this net | | - = No error in this field | | | | Note: Metal delays shown in this report are copper delays only | | (no effects of reflections, IC loading, etc.) For actual | | pin-to-pin delays, see detailed SI simulation results. | | | | Note: Lossy transmission-line modeling used. | -------------------------------------------------------------------- START TIME ********************************************************************** Date ............................. Tuesday Apr. 02,2013 Time ............................. 14:55:20 GENERAL INFORMATION ********************************************************************** Board ............................ ADP_SPEC_45.hyp Total number of nets ............. 104 Total number of components........ 26 Board temperature ................ 20.0 degrees C Default IC model (used for quick analysis if IC model is missing) IC driver rise/fall time ..2.000 ns IC driver switching voltage range ..3.00 V IC driver output impedance 1.0 ohms IC input capacitance ..... 7.0 pF CHANGED PASSIVE-COMPONENT VALUES ********************************************************************** Reference Designator User Entered Value -------------------- ------------------ NEW TERMINATING COMPONENTS (Quick Terminators) ********************************************************************** Terminator Location Type Value(s) --------------------------- ------------------ ------------------- CROSSTALK REPORT - QUICK ANALYSIS ********************************************************************** The following crosstalk information is intended to be worst case estimates assuming all nets are unterminated. Actual driver rise and fall times have been used for the estimates where models were found. The HyperLynx field solver and equation-based estimates have been combined with an expert system to compute peak crosstalk magnitudes. The crosstalk values are the sum of crosstalk from each segment for each electrically connected set of associated nets. Although these estimates are more accurate than can be calculated manually using closed-form equations, they are estimates only. Run detailed simulations to find actual crosstalk levels. These estimates are useful for determining which nets to simulate in detail. Maximum allowed crosstalk ........... 50 mv peak NET = RPLY ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) DCLO ........................... 194 mv BIAKO .......................... 179 mv Sum of the two strongest aggressors ............. 373 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D3 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) ADR17 .......................... 182 mv AD2 ............................ 150 mv D5 ............................. 74 mv AEN ............................ 69 mv Sum of the two strongest aggressors ............. 332 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = ADR17 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D3 ............................. 180 mv ADR16 .......................... 115 mv Sum of the two strongest aggressors ............. 295 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = DCLO ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) RPLY ........................... 195 mv DB ............................. 95 mv Sum of the two strongest aggressors ............. 290 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D4 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D6 ............................. 147 mv D1 ............................. 141 mv Sum of the two strongest aggressors ............. 288 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D1 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) REST ........................... 143 mv D4 ............................. 141 mv Sum of the two strongest aggressors ............. 284 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = SIA ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) RPLY_I ......................... 181 mv DB ............................. 96 mv Sum of the two strongest aggressors ............. 277 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = DB ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) IAKO ........................... 167 mv SIA ............................ 96 mv DCLO ........................... 95 mv BIRQ ........................... 91 mv Sum of the two strongest aggressors ............. 263 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = -IOR ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) A7 ............................. 133 mv -IOW ........................... 128 mv A3 ............................. 99 mv A4 ............................. 54 mv Sum of the two strongest aggressors ............. 261 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = -IOW ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) -IOR ........................... 128 mv D0 ............................. 124 mv AD0 ............................ 121 mv A3 ............................. 106 mv A7 ............................. 76 mv Sum of the two strongest aggressors ............. 252 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = AD2 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D3 ............................. 150 mv ADR20 .......................... 101 mv Sum of the two strongest aggressors ............. 251 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = BDOUT ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) P1 ............................. 242 mv Total estimated crosstalk ....................... 242 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = AD0 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) BIRQ ........................... 125 mv AD1 ............................ 110 mv -IOW ........................... 65 mv Sum of the two strongest aggressors ............. 235 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = ADR19 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) AD13 ........................... 126 mv ADR20 .......................... 98 mv A8 ............................. 53 mv Sum of the two strongest aggressors ............. 224 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = BIRQ ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) AD0 ............................ 125 mv DB ............................. 89 mv Sum of the two strongest aggressors ............. 214 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = ADR20 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) #TDO ........................... 103 mv AD2 ............................ 101 mv ADR19 .......................... 98 mv Sum of the two strongest aggressors ............. 204 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = REST ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D1 ............................. 143 mv OSC ............................ 51 mv Sum of the two strongest aggressors ............. 194 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D0 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) -IOW ........................... 124 mv A3 ............................. 69 mv Sum of the two strongest aggressors ............. 193 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = RPLY_I ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) SIA ............................ 181 mv Total estimated crosstalk ....................... 181 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = BIAKO ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) RPLY ........................... 179 mv Total estimated crosstalk ....................... 179 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = IAKO ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) DB ............................. 168 mv Total estimated crosstalk ....................... 168 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = A7 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) A3 ............................. 90 mv -IOR ........................... 72 mv OE_BF .......................... 56 mv Sum of the two strongest aggressors ............. 162 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = A3 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) A7 ............................. 90 mv -IOW ........................... 57 mv -IOR ........................... 53 mv Sum of the two strongest aggressors ............. 147 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D6 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D4 ............................. 147 mv Total estimated crosstalk ....................... 147 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = AD13 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) ADR19 .......................... 127 mv Total estimated crosstalk ....................... 127 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = P1 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) BDOUT .......................... 127 mv Total estimated crosstalk ....................... 127 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = BSIA ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) #TDI ........................... 125 mv Total estimated crosstalk ....................... 125 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = IRQ7 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D2 ............................. 68 mv A8 ............................. 54 mv Sum of the two strongest aggressors ............. 122 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = #TDI ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) BSIA ........................... 121 mv Total estimated crosstalk ....................... 121 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = ADR16 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) ADR17 .......................... 115 mv Total estimated crosstalk ....................... 115 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = AD1 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) AD0 ............................ 110 mv Total estimated crosstalk ....................... 110 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = A8 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) IRQ7 ........................... 54 mv ADR19 .......................... 54 mv Sum of the two strongest aggressors ............. 108 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = #TDO ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) ADR20 .......................... 103 mv Total estimated crosstalk ....................... 103 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D7 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) AEN ............................ 87 mv Total estimated crosstalk ....................... 87 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D5 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D3 ............................. 74 mv Total estimated crosstalk ....................... 74 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = D2 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) IRQ7 ........................... 69 mv Total estimated crosstalk ....................... 69 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = AEN ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) D3 ............................. 69 mv Total estimated crosstalk ....................... 69 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = ADR21 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) AD14 ........................... 65 mv Total estimated crosstalk ....................... 65 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = AD14 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) ADR21 .......................... 64 mv Total estimated crosstalk ....................... 64 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = ADR18 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) AD15 ........................... 57 mv Total estimated crosstalk ....................... 57 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = AD15 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) ADR18 .......................... 57 mv Total estimated crosstalk ....................... 57 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = OE_BF ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) A7 ............................. 56 mv Total estimated crosstalk ....................... 56 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = A6 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) OSC ............................ 55 mv Total estimated crosstalk ....................... 55 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = OSC ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) A6 ............................. 55 mv Total estimated crosstalk ....................... 55 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET = A4 ELECTRICALLY ASSOCIATED NETS -------------------------------------- None AGGRESSOR NETS (Estimated peak crosstalk) -IOR ........................... 53 mv Total estimated crosstalk ....................... 53 mv ** Warning ** Estimate exceeds maximum allowed crosstalk! NET INFORMATION ********************************************************************** NET = A1 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = IRQ7 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 009.771 cm max. recommended length . 008.969 cm NET = -IOR SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A8 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A0 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = ADR21 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 011.902 cm max. recommended length . 008.969 cm NET = D2 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = #TDO SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A5 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = ADR19 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD12 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = RES SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 018.742 cm max. recommended length . 008.969 cm NET = #TCLK SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = REST SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 009.456 cm max. recommended length . 008.969 cm NET = ADR16 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = ADR18 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = D4 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = ADR17 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD1 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD15 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = RPLY_I SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD13 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = D7 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 010.732 cm max. recommended length . 008.969 cm NET = IRQ_B SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SEL SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD4 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD9 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD10 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD6 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD7 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = DIN SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SIA SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = WTBT SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = -IOW SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 019.331 cm max. recommended length . 008.969 cm NET = BAD11 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = P1 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 019.024 cm max. recommended length . 008.969 cm NET = BSEL SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD2 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = DB SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 010.463 cm max. recommended length . 008.969 cm NET = BIAKO SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 011.891 cm max. recommended length . 008.969 cm NET = BDOUT SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 014.849 cm max. recommended length . 008.969 cm NET = ADR20 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 009.551 cm max. recommended length . 008.969 cm NET = AD14 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = D3 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = D6 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = EB1 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 013.115 cm max. recommended length . 008.969 cm NET = AD11 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BSIA SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 009.652 cm max. recommended length . 008.969 cm NET = SD3 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A3 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = OSC SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD15 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = D0 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = D1 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD12 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = IAKO SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = DOUT SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SD6 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = #TDI SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD8 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A2 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = #TMS SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A6 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A4 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BIRQ SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 010.753 cm max. recommended length . 008.969 cm NET = A7 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = A9 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD0 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 010.391 cm max. recommended length . 008.969 cm NET = RPLY SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 010.155 cm max. recommended length . 008.969 cm NET = DCLO SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results TERMINATION VIOLATIONS -------------------------------------------- ** Warning(Severe) ** Net too long! found length ............ 010.963 cm max. recommended length . 008.969 cm NET = AD5 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD8 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AD3 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = AEN SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = D5 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BDIN SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = OE_BF SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BA20 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BA21 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD5 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD6 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD7 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SD0 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BA17 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BA18 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BA19 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD3 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD4 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SD1 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SD2 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BA16 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BWTBT SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD0 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD1 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD2 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SD5 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SD4 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = SD7 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD14 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD9 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD10 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results NET = BAD13 SIGNAL-INTEGRITY STATISTICS --------------------------------------- total receiver capacitance ... 0.0 pF effective net Z0 ............. 497.7 ohms termination type ............. No termination found Net has no driver assigned! Using default driver rise/fall time Use driver IC model for more accurate results END TIME ********************************************************************** Date ............................. Tuesday Apr. 02,2013 Time ............................. 14:55:28 Total Run Time.................... 0 Days, 00 Hours, 00 Minutes 07 Seconds ******************************* END **********************************