--------------------------------------------------------------------
|   HyperLynx Batch Mode Report, Version 8.0                         |
|                                                                    |
| Note:   Search on '** Warning **'  and  '** Warning(Severe) **'    |
|         to find signal-integrity and EMC problems.                 |
|                                                                    |
| Note:   The signal-integrity information below is a summary of     |
|         the results from the corner cases selected for this batch  |
|         run (Fast-Strong, Typical, and Slow-Weak).                 |
|                                                                    |
| Note:   Signal-integrity simulation tests for SI compliance        |
|         against user-set limits, and includes effects of           |
|         transmission-line discontinuities, IC loading, etc.        |
|         SI violation flags include:                                |
|           D = Delay error                                          |
|               -> min delay to pin < net's min delay threshold  OR  |
|               -> max delay to pin > net's max delay threshold      |
|           T = Threshold error                                      |
|               -> during transition, the pin's signal level did     |
|                  not reach the switching threshold                 |
|           R = Rail-overshoot error                                 |
|               -> pin's signal level exceeded the power-supply rail |
|                  by more than the net's overshoot threshold        |
|           O = Signal-integrity-overshoot error                     |
|               -> pin's signal level exceeded the steady-state      |
|                  level by more than the net's overshoot threshold  |
|           M = Multi-threshold-crossing error                       |
|               -> pin's signal level crossed the threshold more     |
|                  than once during transition                       |
|           N = Non-monotonic error                                  |
|               -> pin's signal level changed direction while within |
|                  the transition region between Vil and Vih         |
|           X = Crosstalk error                                      |
|               -> crosstalk from neighbor nets exceeded the         |
|                  threshold value for this net                      |
|           - = No error in this field                               |
|                                                                    |
| Note:   Metal delays shown in this report are copper delays only   |
|         (no effects of reflections, IC loading, etc.) For actual   |
|         pin-to-pin delays, see detailed SI simulation results.     |
|                                                                    |
| Note:   Lossy transmission-line modeling used.                     |
 --------------------------------------------------------------------

START TIME
**********************************************************************
  Date ............................. Tuesday Apr. 02,2013
  Time ............................. 10:42:09

GENERAL INFORMATION
**********************************************************************
  Board ............................ ADP_SPEC_5671-59w.hyp
  Total number of nets ............. 104
  Total number of components........ 26
  Board temperature ................ 20.0 degrees C
  Default IC model (used for quick analysis if IC model is missing)
    IC driver rise/fall time ..2.000 ns
    IC driver switching voltage range ..3.00 V
    IC driver output impedance 1.0 ohms
    IC input capacitance ..... 7.0 pF

CHANGED PASSIVE-COMPONENT VALUES
**********************************************************************
  Reference Designator  User Entered Value
  --------------------  ------------------

NEW TERMINATING COMPONENTS (Quick Terminators)
**********************************************************************
  Terminator Location          Type                Value(s)
  ---------------------------  ------------------  -------------------

CROSSTALK REPORT - QUICK ANALYSIS
**********************************************************************
  The following crosstalk information is intended to be worst case
  estimates assuming all nets are unterminated.  Actual driver rise
  and fall times have been used for the estimates where models were
  found.  The HyperLynx field solver and equation-based estimates have
  been combined with an expert system to compute peak crosstalk
  magnitudes.  The crosstalk values are the sum of crosstalk from each
  segment for each electrically connected set of associated nets.
  Although these estimates are more accurate than can be calculated
  manually using closed-form equations, they are estimates only.  Run
  detailed simulations to find actual crosstalk levels.  These
  estimates are useful for determining which nets to simulate in
  detail.

Maximum allowed crosstalk ...........  50 mv peak

  NET = D6
   ELECTRICALLY ASSOCIATED NETS --------------------------------------
     None
   AGGRESSOR NETS (Estimated peak crosstalk)
     D7 .............................  62 mv
     D4 .............................  53 mv
     Sum of the two strongest aggressors ............. 115 mv
     ** Warning ** Estimate exceeds maximum allowed crosstalk!

  NET = D7
   ELECTRICALLY ASSOCIATED NETS --------------------------------------
     None
   AGGRESSOR NETS (Estimated peak crosstalk)
     D6 .............................  69 mv
     Total estimated crosstalk .......................  69 mv
     ** Warning ** Estimate exceeds maximum allowed crosstalk!

  NET = AD0
   ELECTRICALLY ASSOCIATED NETS --------------------------------------
     None
   AGGRESSOR NETS (Estimated peak crosstalk)
     AD1 ............................  67 mv
     Total estimated crosstalk .......................  67 mv
     ** Warning ** Estimate exceeds maximum allowed crosstalk!

  NET = AD1
   ELECTRICALLY ASSOCIATED NETS --------------------------------------
     None
   AGGRESSOR NETS (Estimated peak crosstalk)
     AD0 ............................  66 mv
     Total estimated crosstalk .......................  66 mv
     ** Warning ** Estimate exceeds maximum allowed crosstalk!

  NET = IAKO
   ELECTRICALLY ASSOCIATED NETS --------------------------------------
     None
   AGGRESSOR NETS (Estimated peak crosstalk)
     REST ...........................  56 mv
     Total estimated crosstalk .......................  56 mv
     ** Warning ** Estimate exceeds maximum allowed crosstalk!

  NET = D4
   ELECTRICALLY ASSOCIATED NETS --------------------------------------
     None
   AGGRESSOR NETS (Estimated peak crosstalk)
     D6 .............................  54 mv
     Total estimated crosstalk .......................  54 mv
     ** Warning ** Estimate exceeds maximum allowed crosstalk!


NET INFORMATION
**********************************************************************
  NET = D1
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = D0
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD5
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = D4
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = IRQ_B
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = ADR21
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD14
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = #TCLK
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = DB
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = P1
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = ADR20
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = EB1
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results
   TERMINATION VIOLATIONS --------------------------------------------
     ** Warning(Severe) ** 
        Net too long!
          found length ............ 009.659 cm
          max. recommended length . 008.969 cm

  NET = D2
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A8
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = REST
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A0
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD4
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD3
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = OSC
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = ADR17
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SIA
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = IRQ7
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD2
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = -IOW
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A1
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SEL
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = DIN
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = ADR19
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = DOUT
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = OE_BF
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = ADR16
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD6
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD15
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = IAKO
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD12
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = D7
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = RPLY_I
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD0
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD7
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = D6
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = -IOR
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = RES
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = #TDO
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = ADR18
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD1
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A3
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = D3
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = WTBT
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD13
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BA16
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BA18
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A5
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BDIN
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = #TDI
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BSIA
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BIAKO
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BA20
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = DCLO
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BIRQ
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results
   TERMINATION VIOLATIONS --------------------------------------------
     ** Warning(Severe) ** 
        Net too long!
          found length ............ 009.348 cm
          max. recommended length . 008.969 cm

  NET = BA21
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A9
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = #TMS
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD7
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD6
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD5
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD1
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BA17
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD10
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = RPLY
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A2
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD9
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD8
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD4
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AD11
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BSEL
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD0
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BA19
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A4
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A6
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD3
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = AEN
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = A7
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = SD2
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = D5
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD8
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BDOUT
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results
   TERMINATION VIOLATIONS --------------------------------------------
     ** Warning(Severe) ** 
        Net too long!
          found length ............ 009.100 cm
          max. recommended length . 008.969 cm

  NET = BAD4
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD7
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD1
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD3
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BWTBT
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD2
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD6
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD14
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD10
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD13
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD12
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD11
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD9
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD15
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD5
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

  NET = BAD0
   SIGNAL-INTEGRITY STATISTICS ---------------------------------------
     total receiver capacitance ... 0.0 pF
     effective net Z0 ............. 497.7 ohms
     termination type ............. No termination found
     Net has no driver assigned!
       Using default driver rise/fall time
       Use driver IC model for more accurate results

END TIME
**********************************************************************
  Date ............................. Tuesday Apr. 02,2013
  Time ............................. 10:42:17
  Total Run Time....................  0 Days, 00 Hours, 00 Minutes 07 Seconds

******************************* END **********************************